About Spat

Posts by Spat:


Lamp Lighting Kit Instructions

Posted by Spat on July 17, 2016 in Cosplay, Props, Testimonials |

Shoulder Lamp Lighting Kit


Supplies Needed:

Shoulder Lamp                                 Drill

Hot Glue                                          Drill Bits


Remember, only paint or sand resin outdoors, or in a well ventilated room while wearing goggles and a mask.


The kit includes – Lighting Kit, Velcro

Lighting Kit

Lighting Kit








Assemble the Lamp kit as per the instructions, but insert these instructions as noted:


4.5: Drill a 5/16” hole in the bottom of the Lamp Head for the wires.







8.5: Drill a 5/16” hole just below the hole you just drilled on the left side of the Outer Body for the wires for the lighting kit to connect.







15.5: Hot Glue the Bulb in place and connect it to the Switch.  The thread the wire out the bottom of the Lamp Head.  I covered the wire in black electrical tape to make it less obvious. 

IMG_7702IMG_7812 IMG_7810IMG_7811IMG_7809











18.5: Use the included Velcro strip to attach the battery pack to the inside of the Lamp Body. And then run the wire into the Lamp Body and connect it to the Battery Pack.














DONE!  Enjoy!







If you ever have any questions about your item, or if a part should break, feel free to drop us a line.

And be sure to join up with your fellow Marines at www.colonialmarines.info and http://forum.alienslegacy.com/


And don’t forget to “Like” our page on Facebook!  https://www.facebook.com/SpatcaveStudios

Tags: , , , , ,


Shoulder Lamp Kit Instructions

Posted by Spat on July 17, 2016 in Cosplay, Props, Tutorials |

Shoulder Lamp Kit   Supplies Needed: Sandpaper Sandable Pimer Matte Clear Coat Drill and Drill Bits OD Green Spray Paint Black Paint Allen Keys Super Glue   Remember, only paint or sand resin outdoors, or in a well ventilated room while wearing goggles and a mask. The kit includes – Outer Body, Inner Body, Grip, […]

Tags: , , , , , ,


Sorry I haven’t posted here a lot!

Posted by Spat on July 10, 2014 in Uncategorized |

I know, I’ve been lazy! I’ve mostly been posting on the SpatCave Studios Facebook page: https://www.facebook.com/SpatcaveStudios Be sure to head over and Like the page!  You’ll see lots of reviews, updates, previews of upcoming events and projects, and other people asking questions that you might also have! At some point I’ll find a way to […]


Back Up And Running!!

Posted by Spat on January 17, 2014 in Uncategorized |

We are officially back up and running making armor! Sorry about the delay, and thanks for your patience!! -Spat


The SpatCave is MOVING!!!

Posted by Spat on December 27, 2013 in Uncategorized |

That’s right, SpatCave Studios is packing up and leaving New York! We’ll be setting up shop in Atlanta, Georgia in the next 2 weeks and will be back to popping out costumes and props as soon as we can! All costume and prop weapon rentals will now be only for local Georgia renters now. There […]


New Spulse Review!

Posted by Spat on June 7, 2013 in Cosplay, Props, Spulse, Spulse Rifle, Testimonials |

Here’s another review we just got in!   Have just about finished my Spulse kit and thought would share a pic and some thoughts , we all know Spat’s work is high quality and after assembling this kit it’s safe to say that his reputation is fully justified! This was my first attempt at something […]

Tags: , , , , , ,


Spulse Rifle Testimonial

Posted by Spat on May 16, 2013 in Cosplay, Spulse, Spulse Rifle, Testimonials |

Just got this email from Darren over at Flare Miniature Painting!   Hello! I just wanted to say thank you for making my job awesome.  I’m a freelance miniature painter (think Games Workshop or any other toy soldiers…) and was asked by a friend (Jon, UK) who bought one of your LED-included pulse rifles if I […]

Tags: , , , , , ,


Hyper Detailing an “I, Robot” Pistol Kit

Posted by Spat on September 14, 2012 in Cosplay, irobot, Movies, Props, Testimonials, Tutorials |

Alan H. took one of my I, Robot pistol kits and did some amazing things with it!                                                   And here’s how he did it!

Tags: , , , ,


New Spulse Build!

Posted by Spat on May 30, 2012 in Props, Spulse, Spulse Rifle, Testimonials |

Alan from Australia just sent over these pics of his completed MK V Spulse!                


Zombie Bite Application Process

Posted by Spat on May 21, 2012 in FX, Tutorials, Zombie |

Here’s a quick tutorial on applying a foam latex appliance.                    

Tags: , , , , ,

Copyright © 2011-2016 Spat's Blog All rights reserved.
This site is using the Desk Mess Mirrored theme, v2.0.4, from BuyNowShop.com.