Spare Magazine Prop Kit

Instructions

Supplies Needed:

Sandpaper (light grit)

Primer

Flat Black Spray Paint

Silver Paint

Matte Clear Coat Spray Paint

OD Paint

 

Here's what you get in the box.
Wash the kit in warm, soapy water and let air dry.
Lightly sand kit and clean up the seam lines. If there are any air bubbles or imperfections on the kit, fill with Model Putty and when dry, sand smooth. Be sure to sand the kit in a well ventilated area as resin dust may be harmful.

Prime the kit. Be sure to paint ONLY in a well ventilated area. Allow paint to thoroughly dry. To save a step, I primed it with Flat Black Primer. If you used another color Primer, then after it dries, paint the kit with Flat Black paint.
Mask off the Magazine Base.

Paint the base OD Green. Be sure to paint ONLY in a well ventilated area. Allow paint to thoroughly dry.
Coat it with the Matte Clear Coat. Be sure to paint ONLY in a well ventilated area. Allow paint to thoroughly dry.
Paint the bullets silver, or whatever color you want. Also, you can detail and weather the magazine with the silver paint while you have it out.

 

A very simple resin kit that needs just a little clean-up and some paint to make a very nice display piece for every fan!

 

Payments accepted are bank certified checks, money orders, and PayPal.

International Shipping is available.

For shipping prices, please use the checkout cart in the store, it calculates the shipping costs for you prior to the payment being due.

All items are made to order at the time payment is made. Please expect 4-6 weeks for the items to be ready to ship.

Available in the SpatCave Store.


Prices subject to change without notice.

IF YOU HAVE ANY QUESTIONS, CONTACT US