Supplies
Needed:
X-Acto
Knife
Primer
Flat
Black Spray Paint
Silver
Paint
Matte
Clear Coat Spray Paint
|
Here's
what you get in the box. |
 |
Wash
the kit in warm, soapy water and let air dry. |
 |
Lightly
sand kit and clean up the seam lines. Carefully use the X-Acto knife
to trim off any flash. You can also just use your finger nails.
The rubber is pretty easy to remove. Be sure to sand the kit in
a well ventilated area as resin dust may be harmful. |
|
Prime
the kit. Be sure to paint ONLY in a well ventilated area. Allow
paint to thoroughly dry. To save a step, I primed it with Flat Black
Primer. If you used another color Primer, then after it dries, paint
the kit with Flat Black paint. This is really an optional step.
You can easily just clear coat it without painting it, since it's
in black anyway. |
|
Paint
the kit with a Matte Clear. Be sure to paint ONLY in a well
ventilated area. Allow paint to thoroughly dry. |
|
I
detailed the blade edges with silver paint. And you're all done!
|
|
A
very simple kit that needs just a little clean-up and some paint to
make a very nice display piece for every fan!
Gerber MK II Kit - $30 plus shipping.
Payments
accepted are bank certified checks, money orders, and PayPal.
International
Shipping is available.
For
shipping prices, please use the checkout cart in the store,
it calculates the shipping costs for you prior to the payment being
due.
All
items are made to order at the time payment is made. Please expect 4-6
weeks for the items to be ready to ship.
Available
in the SpatCave Store.
Prices
subject to change without notice.
