Blade 2 Match USP LAM Unit Kit

Instructions

Supplies Needed:

4x 8-32 x 1/4" Set Screws

5/64 Hex Wrench

X-Acto Knife

Drill

1/8" Drill Bit

0000 Gauge Steel Wool

Laser Key Chain

Mag Light Solitaire Flashlight

Double Stick Tape

Flat Black Paint

Match USP Airsoft Pistol

	Here's what you get out of the box.
	Here is the items included in the Accessories Pack.
	Wash all parts in warm, soapy water and allow to air dry.
	Remove any flash from the kit with a sharp X-Acto Knife. Be very careful, and work slowly. Do not use sandpaper on this resin as it will prevent the aluminum powder from shining up.
	Drill 1/8" holes at the designated points on the upper and lower units. Be sure to keep the drill bit straight, and do not wiggle it!
	Using the Hex Wrench and the Set Screws, thread the holes you just drilled.
	Paint the inner slots flat black. Allow to dry.
	Buff the upper and lower parts using the Steel Wool to get them nice and shiney!
	Attach the flashlight with the double stick tape to the underside of the Pistol.
	Place the Laser Pointer (button up and to the side) in the Lower Body and put in place on the pistol.
	Place the Upper Body in place with the Lower Body, and affix with the Set Screws.
	To turn on the flashlight just twist the head. To turn on the laser, just rotate it.
	You're ready to hunt some Vampires!!

 

A very simple kit that needs just a little work to make a very nice display piece for every Aliens fan!

 

Payments accepted are bank certified checks, money orders, and PayPal.

International Shipping is available.

For shipping prices, please use the checkout cart in the store, it calculates the shipping costs for you prior to the payment being due.

All items are made to order at the time payment is made. Please expect 4-6 weeks for the items to be ready to ship.

 

And don't forget the:

Includes the accessories needed to assembe the Blade 2 USP LAM kit.

Prices subject to change without notice.

IF YOU HAVE ANY QUESTIONS, CONTACT US