Belt Tool Prop Kit

Instructions

Supplies Needed:

Drill

Sandpaper

Primer

Flat Black Spray Paint

Screw

Matte Clear Coat Spray Paint

 

	Here's what you get in the box.
	Wash the kit in warm, soapy water and let air dry.
	Lightly sand kit and clean up the seam lines. If there are any air bubbles or imperfections on the kit, fill with Model Putty and when dry, sand smooth. Be sure to sand the kit in a well ventilated area as resin dust may be harmful.
	Prime the kit. Be sure to paint ONLY in a well ventilated area. Allow paint to thoroughly dry. To save a step, I primed it with Flat Black Primer. If you used another color Primer, then after it dries, paint the kit with Flat Black paint.
	Paint the kit with a Matte Clear. Be sure to paint ONLY in a well ventilated area. Allow paint to thoroughly dry.
	Cut away the small bar on the main body.
	Put the armo in place on the main body. Drill a 1/8" hole in them.
	Screw in a #6 x 3/4" screw in place to hold it together. And you're all set!

 

A very simple kit that needs just a little clean-up and some paint to make a very nice display piece for every fan!

 

Payments accepted are bank certified checks, money orders, and PayPal.

International Shipping is available.

For shipping prices, please use the checkout cart in the store, it calculates the shipping costs for you prior to the payment being due.

All items are made to order at the time payment is made. Please expect 4-6 weeks for the items to be ready to ship.

Available in the SpatCave Store.

Prices subject to change without notice.